If the Paper Jams
If the paper jams while printing, the ALARM indication lights.
Follow the steps below to remove the jammed paper.
When the jammed paper is removed, you do not need to continue operation
explained below. Stop operation and reset removed paper ejector, paper tray or ink
ribbon holder if any.
1
2
3
4
5
6
Open the front panel.
If any printouts have been ejected to the paper ejector and have accumulated on
the paper ejector, remove them. If not go to the next step.
Turn off the power of the printer.
Remove the paper ejector.
When you can see paper inside the printer, go to step 5.
When you cannot see paper, go to step 8.
Slowly pull the paper into the paper ejector.
Note
Never attempt to pull a jammed paper down, up, backwards, or forwards, the
paper may tangle or tear.
If you cannot pull the paper, go to the next step.
Remove the paper tray.
If the paper has jammed around the slot where the paper is fed, remove it.
Printouts
Paper
Continue to next page m
Others
25