Herunterladen Inhalt Inhalt Diese Seite drucken

Correct Electrical Installation; Safe Operation - Oase PondoVac Premium Gebrauchsanleitung

Vorschau ausblenden Andere Handbücher für PondoVac Premium:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
3.2

Correct electrical installation

Electrical installations must meet the national regulations and may only be carried out by a qualified
electrician.
A person is regarded as a qualified electrician, if, due to his/her vocational education, knowledge and
experience, he or she is capable of and authorised to judge and carry out the work commissioned to
him/her. This also includes the recognition of possible hazards and the adherence to the pertinent
regional and national standards, rules and regulations.
For your own safety, please consult a qualified electrician.
The unit may only be connected when the electrical data of the unit and the power supply coincide.
The unit data is to be found on the unit type plate or on the packaging, or in this manual.
Ensure that the unit is fused for a rated fault current of max. 30 mA by means of a fault current
protection device.
Extension cables and power distributors (e. g. outlet strips) must be suitable for outdoor use.
Only plug the unit into a correctly fitted socket.
3.3

Safe operation

Never operate the unit if either the electrical cables or the housing are defective!
Do not carry or pull the unit by its electrical cable.
Route cords/hoses/lines in a way that they are protected against damage, and ensure that they do not
present a tripping obstacle.
Only open the unit housing or its attendant components, when this is explicitly required in the operating
instructions.
Only execute work on the unit that is described in this manual. If problems cannot be overcome, please
contact an authorised customer service point or, when in doubt, the manufacturer.
Only use original spare parts and accessories for the unit.
Never carry out technical modifications to the unit.
If the cable becomes damaged, the unit or components must be replaced by an authorised after-sales
service centre or the manufacturer.
Only operate the unit if no persons are in the water!
Keep the socket and power plug dry.
Keep the plug connectors dry.
- EN -
21

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis