Operation; Operating Panel - Oase PondoVac Premium Gebrauchsanleitung

5

Operation

5.1

Operating panel

5
1 Switching on/off
off: Unit is switched off
on: Unit is switched on
The vacuum starts up.
−
The discharge pump switches on when the max. water level is reached. (1)
−
2 Switching on the motor (overload) protection switch
The motor (overload) protection switch switches off the discharge pump in the event of a blockage. (→ Remedy of faults)
The unlock button pops out.
−
To switch the discharge pump on again: Press the unlock button.
−
3 Pump ON
For manually switching on tank emptying, e.g. after operation or to allow the unit to be moved more easily.
Press the button: The discharge pump is switched on (LED is lit).
−
Release the button: The discharge pump is switched off.
−
4 Vac OFF
For manually switching off the vacuum to briefly reduce the sound emission.
Press the button: The vacuum is switched off (LED is lit).
−
Release the button: The vacuum switches on
−
5 LEDs for indicating the water level
Green LEDs are lit:
••• maximum water level
•• medium water level
• low water level
Red LED is lit:
• minimum water level
PondoVac
Premium
Vac
OFF
Pump
ON
4 3
off
2 1
- EN -
PVC0013
23