Setting Up And Connecting; Set-Up Location Requirements; Electrical Connection - Silvercrest SFS 110 A1 Bedienungsanleitung

Setting up and connecting

Set-up location requirements

For safe and trouble-free operation of the device , the set-up location must fulfi l
the following requirements:
■ When setting it up, place the appliance on a fi rm, fl at and horizontal
surface.
■ Do not place the device in a hot, wet or extremely damp environment or in
the vicinity of fl ammable materials.
■ The mains power socket must be easily accessible, so that the power cable
can be easily disconnected in the event of an emergency.

Electrical connection

CAUTION
► Before you connect the appliance, compare the connection data (voltage
and frequency) on the data plate with that of your mains power network.
These data must agree so that no damage is sustained by the device.
► Ensure that the power cable is undamaged and is not routed over hot
surfaces and/or sharp edges.
► Ensure that the power cable is not taut or kinked.
► Do not let the power cable hang over edges (trip wire eff ect).
♦ Insert the plug into the mains mains power socket.
SFS 110 A1
GB
7