GUTMANN Nube Bedienungsanleitung Seite 15

trichloroethylene, etc. will lead to the
destruction of the filter!
Screw the metal filter together again after
cleaning and insert into the bonnet. After
that, the glass panel must be placed into
its initial location again. To do this, guide
the glass panel upwards with both hands
until the quick locks snap into place
Exchange of the active carbon
filter
(only extractor hoods with circular air – version D)
Active carbon filters bundle up odorous
substances which are contained in the
kitchen fume. According to the strain of work
this filter has to be exchanged after 3-6
months.
The active carbon filter is often mounted on
a frame sitting below the ventilator module.
For the exchange of the active carbon filter
turn both black toggle screws around 90
degrees. After flapping down the pane and
taking out the frame the filter can be changed
easily. The installation is made in reverse
order.
By some extractor hoods the active carbon
filter is directly mounted on the metal filter.
After the removal of the metal filters take
the charcoal filter out and substitute it by a
new one. Important: please do not clean
the active carbon filter with water or any other
liquid.
Lighting change
Defective illuminants must be exchanged
immediately.
De-energized exhauster hood before the
replacement of the illuminants! The lighting
remains hot for a long time. Please wait
until they have cooled before changing
them.
After cooling down, the illuminant must be
held at the edge with both fingers, then
move the illuminant down carefully (plug-in
receptacle) until the illuminant is released
from the socket. It is absolutely necessary
to avoid contact with the skin during the
insertion of the new illuminant; employ a
clean cloth to do this.The installation of a
new illuminant is
en