Introduction / Safety advice
Technical data
Q
Maximum jaw opening width:
Length of jaws:
Weight:
Height:
Included items
Q
1 Vacuum base vice
1 Operating instructions
Safety advice
KEEP ALL THE SAFETY ADVICE AND INSTRUCTIONS
IN A SAFE PLACE FOR FUTURE REFERENCE!
CAUTION! DANGER OF INJURY! When working with
hand-held electrical power tools you can be seriously injured
if the clamped workpiece slips or becomes loose. Never work
on a clamped workpiece using hand-held electrical power tools.
Check the product before each use for any damage. Do not
J
use the product if you discover it is damaged in any way.
Check all threaded connections on the product for proper
J
seating before each use.
Check regularly the lever suction pad for proper seating and
J
retighten if necessary.
J
Attach the vice to a smooth, stable, flat, undamaged surface,
free of dust and grease.
The vice is an aluminium injection casting and therefore is only
J
impact resistant to limited extent.
Do not use extension tubes on the tommy bars. There is the
J
danger of overloading (fracturing) the spindle.
J
Wear safety gloves and glasses.
6
GB/IE
approx. 70 mm
approx. 70 mm
approx. 1,150 g
approx. 16 cm