Wear Parts - Oase BioCompact 50 Gebrauchsanleitung

BioCompact 50
How to proceed:
 E
1. Remove the lid of the filter container.
2. Pull out the foam holder.
3. Remove the foam filter and rinse in warm wa-
ter or replace.
4. Pull out the filter box.
5. Remove the foam filter and rinse in warm wa-
ter or replace.
6. Replace the activated carbon.
7. Reassemble the unit in the reverse order.
Replacing the impeller unit
BioCompact 25/50
How to proceed:
 F
1. Pull off the motor housing.
2. Remove the impeller unit, clean or replace.
3. Reassemble the unit in the reverse order.

WEAR PARTS

The following components are wear parts and
are excluded from the warranty:
•
Impeller unit
•
Filter media
•
Suction cups
DISPOSAL
Do not dispose of this unit with domestic waste!
For disposal purposes, please use the return sys-
tem provided. Render the unit unusable before-
hand by cutting the cables.
GUARANTEE
For this OASE unit purchased by you, OASE
GmbH assumes a 36 month manufacturer's
guarantee in accordance with the guarantee
conditions laid down in the following. The guar-
antee period starts with the first purchase from
an OASE specialist dealer. In other words, in the
event of a resale, the guarantee period will not
start again. If services are provided under the
terms of this guarantee, this does not lead to ex-
tension or renewal of the guarantee period. Your
legal rights as a purchaser, especially those ensu-
ing from the warranty, persist. They are not re-
stricted by this guarantee.
Guarantee conditions
OASE GmbH guarantees impeccable, purpose-
related properties and workmanship, expert as-
sembly and proper functionality. Subject to our
discretion, the guarantee refers to free-of-
charge repair or free-of-charge supply of spare
parts or of a replacement unit respectively.
Should the unit type concerned no longer be
manufactured, we reserve the right, at our dis-
cretion, to supply a replacement unit from our
- EN -
17