Troubleshooting - Powerfix Z22855 Bedienungsanleitung

Comparison of plug and socket (see fig. C):
j
First measure the dimensions of the plug.
j
You may wish to make a note of the measurement.
j
Then measure the socket.
Deviation from a reference value (see fig. D):
j
Measure a reference object (in this case A).
j
Leave the measuring jaws
and press the key to obtain the zero setting (ZERO)
j
Then measure the second object.
The LCD display
ment of the second object to that of the reference object (A).
Measuring the thickness of the floor of an object
(see fig. E):
j
First measure the depth of the object.
j
Leave the depth blade
to obtain the zero position (ZERO)
j
Now measure the entire object.
The LCD display
the object.
Measuring the distance between two identical
holes (see fig. F):
j
First measure one of the two, equally sized holes.
j
Leave the measuring jaws
the key to obtain the zero position (ZERO)
j
Now measure the total dimension.
The LCD display
Characteristics of metric ISO screw threads:
Nominal diameter:
[mm]
3
4
5
6
8
10
12
16
20

Troubleshooting

Q
The device contains sensitive electronic components. That is why
it experiences interference when in close proximity to radio trans-
mission devices. These include, for example, mobile phones, two-
way radios, CB radios, radio controls or other remote controls
10 GB/IE
/
2 11
now shows the deviation of the measure-
5
in this position and press the key
6
now shows the thickness of the floor of
5
/
2 11
now shows the average distance.
5
Increase: Core diameter:
[mm ] [mm]
-1
0.5 2.46
0.7 3.24
0.8 4.13
1 4.92
1.25 6.65
1.5 8.38
1.75 10.11
2 13.84
2.5 17.29
in this position
.
9
in this position and press
.
9
Drill
diameter:
[mm]
2.5
3.3
4.2
5
6.8
8.5
10.2
14
17.5
.
9