GAUI X5 Lite Bedienungsanleitung Seite 43

Page 20
Upper figure:
The figure shows the schematic setup of the rotor head. The rubber rings #208902 (75°) or #208912 (90°) can be used to
influence the rotor head buffering (soft or stiff). The individual work steps for disassembly are marked with numbers in the
drawing.
Important!
Observe that the inner bearing disc of the axial ball bearing in the main rotor blade holder has a large bore (see
top right sketch).
Lower figure:
The figure shows the schematic setup of the rotor head. The individual work steps for disassembly are marked with
numbers in the drawing.
Page 21 - 29
Pages 21 to 28 show the explosion drawings of the individual assemblies with the associated spare parts designations and
spare parts numbers.
Attention!
Please observe that the 6-digit numbers in the manufacturer's manual are no Conrad order numbers!
For the current list of spare parts with the corresponding Conrad Electronic order numbers, see www.conrad.com
in the download area of the respective model helicopters.
43