Eaton 9910-E83 Installationsanleitung Seite 25

5. Secure the rail to the rear of the rack with four M5 machine screws
and an adapter plate (see Figure 4).
Tighten all screws at the front and rear of the rail.
Bottom of Rack or
Top of Other Cabinet
Figure 4. Securing the Rear Rail (Right Rail Assembly Shown)
6. Repeat Steps 3 through 5 for the other rail.
7. To tighten the rail adjustment, assemble four M4 machine screws
and four M4 locknuts to the middle of the rail assembly. Tighten
using a 7 mm (9/32") nut driver. See Figure 5.
Repeat for the other rail.
M4 Screws
Figure 5. Tightening the Rail Adjustment (Right Rail Assembly Shown)
®
Eaton 9140 (9910-E82/E83) UPS Installation Guide for IBM
Adapter Plate
Position 6
Position 1
S
®
Applications 164201715 Rev 2
www.eaton.com/ibm
INSTALLATION
Position 5
Position 4
Position 3
Position 2
M4 Locknuts
9