System Setting - DJ-Tech U2 Station Benutzerhandbuch

SYSTEM SETTING

SETUP MODE
Press the TIME button for more than 2 seconds to enter system setting mode. At
this time, LCD display "PRESET".
Note: System setting will be closed automatically when there is no action for more
than 10 seconds.
To exit the system settings, you can turn the FOLDER knob counterclockwise to
PRESET submenu and then press the FOLDER knob.
NOTE: You can also exit the system settings by pressing again the TIME button.
Once enter the SETUP mode you can browse the items by turning FOLDER knob, and pressing FOLDER
knob to on or off item selection, see more details of the different submenus and options as below:
AUTO CUE: This will indicate if the Auto Cue is on or off.
The default setting is AUTO CUE.
REPEAT: OFF –All the tracks in the USB drive will be played in the normal mode.
REPEAT: ON –The tracks within one folder are playback.
The default setting is REPEAT OFF.
RELAY: Press the FOLDER knob to switch the RELAY on and off.
RELAY: ON –The unit will play the songs from the 2 players A and B alternatively. That means when
Player A is finished, Player B will start atomically. This function must be used in the single play mode.
The default setting is RELAY OFF.
FADER START: Press the FOLDER knob to switch the FADER START function on and off.
FADER START: ON –The fader start will only react on the crossfader of the internal mixer. When the fader
start feature is activated, sliding the crossfader from left to right will play or cue the 2 players.
Example: Slide the crossfader to the player 1 position (fully left) and begin playback on player 1. By sliding
the crossfader to the player 2 position, player 2 will start to play immediately when the fader starts to move
towards right, and return player 1 to cue mode when the fader reaches fully right.
FADER START: OFF – When the fader start feature is deactivated sliding the crossfader from left to right
will not play or cue the 2 players.
Turn the FOLDER knob to scroll through the different submenus, you can adjust
the setting by stopping on the desired submenu and pushing the FOLDER knob.
14