DJ-Tech U2 Station Benutzerhandbuch Seite 13

BASIC OPERATION
4. EDITING A LOOP
You can edit your seamless loop you obviously must first have created a
seamless loop to edit. If you haven't created a SEAMLESS LOOP, follow the
instructions in step 1 to create a loop.
There are three methods as below:
(1) Edit a seamless loop's ending point
You can edit the end point of the loop to make your loop shorter. Make sure
the loop that you want to edit is not in reloop mode. Turn the JOG WHEEL in
search mode to make the loop shorter/ longer. Press the OUT button to set the
new ending point of your loop and press RELOOP to trigger the loop.
(3) Reset a loop
You can reset a new loop under the play or pause mode. Whenever you find a
more desired starting point press the IN button, the LED of OUT button will go
out. Find a new ending point and press the OUT button to set the ending point
of your new loop.
(2) Edit a seamless loop's starting point
You can edit the starting point of the loop to make your loop shorter. Under the
reloop mode, turn the JOG WHEEL clockwise in search mode to make the loop
shorter. Please make sure the new starting point must before the ending point.
Press the IN button to set the new starting point of your loop.
12