DJ-Tech U2 Station Benutzerhandbuch Seite 12

BASIC OPERATION
SEAMLESS LOOP
1. CREATING AND PLAYING A SEAMLESS LOOP
A seamless loop is a sound loop that plays continuously without sound interruption. You can use this loop
to create dramatic effect in your mixing. This loop has no time limit and you could actually loop the entire
length of the current folder. You can create a seamless loop between two continuous points of a music
source device.
(1) Press PLAY/PAUSE BUTTON
to activate playback mode.
3. REPLAY LOOP
The RELOOP function allows you to return to your stored loop at any time. The
IN BUTTON and OUT BUTTON LEDs will indicate a loop is stored in memory,
and may be played at any time. To replay the loop, press the RELOOP BUTTON.
The IN BUTTON and OUT BUTTON LEDs will again begin to flash indicating
SEAMLESS LOOP mode has been activated and your stored loop will
immediately begin to play.
(2) Press the IN BUTTON. This
will set the starting point of
the SEAMLESS LOOP. The
IN BUTTON LED will blink.
2. EXITING A LOOP
To exit a SEAMLESS LOOP, press the OUT BUTTON. The IN BUTTON
and OUT BUTTON LEDs will remain on, but will stop flashing. Music
playback will resume normal play. The IN BUTTON, OUT BUTTON LEDs
and RELOOP/LOOP indicator in the LCD will remain on to remind you that a
loop is stored in memory.
11
(3) Press the OUT BUTTON to
set the ending point for your
SEAMLESS LOOP. The IN
BUTTON and OUT BUTTON
LEDs will immediately begin
to flash rapidly, indicating the
SEAMLESS LOOP mode has
been activated.