Water Drainage - ecofort ecoQ 9L Betriebsanleitung

When positioning your ecofort ecoQ 9L steady dehumidifier, ensure that it is placed securely on a
level surface clear of any obstacle that may limit the air movement. This dehumidifier is designed
only for indoor residential / office applications. Any commercial or industrial use will invalidate the
warranty. Place the dehumidifier on a flat dry surface. Do not use outdoors.

WATER DRAINAGE

When the water tank is full, the unit will stop automatically. When this happens the water full indicator
light will blink on the control panel.
To empty the tank, please follow the steps:
1. Hold the unit with one hand to make it stand firmly.
2. Pull out the tank squarely from the unit.
3. Grasp the water tank handle and empty the water from the drain.
After the tank has been emptied, return the water tank to its position, and make sure it is
properly inserted, so that the 'water full' LED is not lit, and the unit returns to normal operation.
Notes:
• Do not remove the water tank immediately after the unit stops. Please wait a while to avoid the
water dripping into the unit and causing damage.
• Only empty the water tank when it is full or before moving or storing the unit.
• When you remove the tank, do not touch sensors or any parts which are
situated behind tank. Doing so may damage the product. Be sure to push
the tank gently all the way into the unit.
• Do not remove or damage the float switch in the water-tank, otherwise the
machine will stop working.
• Please make sure the water tank cover is put back into place correctly before
the water tank is reinserted.
• If the water-tank is inserted incorrectly, the tank full
indicator will flash. Remove the water tank and reinsert
to turn the indicator off and resume normal use.
• At all times, avoid water entering the unit. It may cause
an electrical hazard and damage the unit.
75