Front Humidity Indicator - ecofort ecoQ 9L Betriebsanleitung

FRONT HUMIDITY INDICATOR

The ecofort ecoQ 9L steady in equipped with an intelligent humidity display
on the front, giving the user an immediate visual indication of the ambient
humidity. The front LED's will change colour to indicate the current humidity
level
OPERATION
Before operating the unit, please ensure it is plugged into a mains socket,
and open the air deflector on the top of the unit.
Switching the unit ON and OFF
Press the power button to turn on the unit. The unit will start to work in sleep mode, with a desired
humidity of 50% set. To turn off the unit press the power button again.
Please note that when turning it off, the dehumidifier will still operate for a number of minutes to
discharge the remaining water from the desiccant disk and prevent mould growth.
Setting the Laundry Mode
Press the Laundry Button
control will be disabled.
Do not dry laundry above the unit to prevent water entering the dehumidifier. Place the laundry
at least 40 cm away from your dehumidifier. Direct the unit with front vents towards the clothes
airer or hanging clothes. Hot dry air comes from a 45 degrees angle. Laundry mode can be used in
conjunction with the stopping timer.
Setting the Timer
On pressing the timer key
hours after which the dehumidifier will stop. The displayed time will revert to humidity display a
number of seconds after selection was made.
72
luce blu - umidità ambientale >70%
luce verde - umidità ambientale 50 - 70%
luce rossa - umidità ambientale <50%
Please note: This indicator is not shown during
sleep mode.
. Laundry mode will set the fan and heater on to maximum and humidistat
the 2 digits LED display will cycle through 1-24 showing the number