Sony MEX-DV1600U Bedienungsanleitung Seite 21

To stop playback
Press (SOURCE/OFF) for 1 second.
With the card remote commander, press (OFF).
To play videos of iPod with video
1 Press
during playback.
2 Rotate the control dial to select "VIDEO," then press it.
3 Rotate the control dial to select the desired play mode, then press it.
4 Rotate the control dial to select the desired video, then press it.
With the card remote commander, press M/m instead of rotating the control dial, press (ENTER)
instead of the control dial.
To disconnect the iPod
Stop playback, then disconnect.
Do not disconnect during playback, as data in the iPod may be damaged.
About the resuming mode
When the iPod currently playing is connected to the dock connector, the mode of this unit changes to
resuming mode and playback starts in the mode set by the iPod.
In resuming mode, (1) (REP) and (2) (SHUF) do not function.
About the Quick-BrowZer function
The Quick-BrowZer function allows you to easily search for an item in an iPod containing many
categories/tracks. For details, see "Listing up tracks/images/video files — Quick-BrowZer" on page 32.
About the ZAPPIN function
The ZAPPIN function allows you to easily search for a track, for example, in shuffle or shuffle repeat
mode. For details, see "Searching a track by listening to track passages — ZAPPIN™" on page 33.
Caution for iPhone
When you connect an iPhone via USB, telephone volume is controlled by iPhone itself. In order to avoid sudden
loud sound after a call, do not increase the volume on the unit during a telephone call.
Notes
• An auxiliary device connected to the AUX input jack (front) cannot be selected with an iPod connected to the
USB connector.
• Do not detach the front panel during playback of the iPod, otherwise data may be damaged.
• This unit cannot recognize iPod via a USB hub.
Tips
• When the ignition key is turned to the ACC position with the unit on, the iPod will be recharged.
• If the iPod is disconnected during playback, "NO DEV" appears in the display of the unit.
21