Connecting The Line Outlets - Renkforce CD-7516 Bedienungsanleitung

Connecting the LINE Outlets

The CD tuner has one LINE outlet for connecting power amplifiers.
Only use suitable shielded cinch wires for connecting the cinch sockets. The use of other
cables might cause interference.
Keep the length of the connecting cables as short as possible.
Do not place the cables near other cables. This helps to avoid interference in the cables.
To avoid distortions or mismatching that could damage the unit, the cinch connector must only
be connected to devices with the suitable cinch terminals. Observe also the connection data
in the section „Technical Data".
• Connect the sockets LINE OUT with the inputs of a power amplifier.

The red socket is the terminal for the right channel
The white socket is the terminal for the left channel
50
Operating Instructions

English