Service Addresses; Service Intervals; Disposal - NovoPress ACO202XL Betriebsanleitung

Service addresses

You can find the addresses of authorised specialist workshops on the "Service addresses"
sheet provided or at www.novopress.de.

Service intervals

Service and repair work may only be carried out by Novopress or the authorised Novopress
specialist workshops.
Information!
The next service deadline is indicated on the press device.
This service must be performed at least every 2 years or at the latest when the LED
display indicates that a service is due (see Section 8.2 Meaning of the LED display).
Routine inspection (before use, at the start of the working day) and when soiled
(Fig. 13 + 14)
Check for visible damage, material cracks and other signs of wear. If defects are found, do not
use the device and have it repaired.
Six-monthly inspection
Have the device inspected by a qualified electrician or a Novopress workshop.
Annual inspection
Have the press device inspected and serviced at Novopress or a Novopress workshop.
10

Disposal

CAUTION!
Groundwater hazard
The device contains hydraulic fluid.
Hydraulic fluids pose a hazard to groundwater. Uncontrolled drainage or improper
disposal is punishable by law.
Therefore:
– Dispose of the device in an environmentally responsible manner.
The instructions in the operating instructions provided with the battery charger must be
complied with when disposing of rechargeable batteries and the charger.
Novopress recommends that disposal be carried out by authorised specialist companies.
This product conforms to the requirements in EU Directive 2002/95/EC RoHS (Restriction of
Hazardous Substances).
In accordance with EU Directive 2002/96/EC WEEE (Waste Electrical and Electronic
Equipment), manufacturers of electrical devices are obliged to take back old devices and to
dispose of them in an appropriate manner.
The product must not be disposed of as normal household waste. Old devices must be returned
directly to Novopress for proper disposal.
25
ACO202XL
EN