PERFECTPRO DAB+MATE Bedienungsanleitung Seite 26

Socket for software upgrade
From time to time, new software features for your radio may be developed. Your radio has therefore
been designed to allow its internal software to be updated using your USB upgrade port. You should
not attempt to update your radio unless it is recommended to you by Perfectpro Customer Services.
Updating the software may remove all radio station presets and settings from your radio.
Software updates for your radio may be available in the future. As software updates become
available software and information on how to update your radio can be found at: www.perfectpro.eu
For more information, please contact our Head Office by sending an email to info@perfectpro.eu
1. Using the micro USB cable (not supplied) to connect the USB socket in the battery compartment
and your PC.
2. With your radio switched on, press and hold the Info/Menu button to access the menu for the
current mode.
3. Rotate the Tuning control knob to select "System" and press the Tuning control knob to enter the
system settings menu.
4. Rotate the Tuning control knob to select "Software Upgrade" and press the Tuning control knob to
enter the setting.
5. Rotate the Tuning control knob to select "Yes" or "No". If you do not wish to carry out a software
upgrade, select "No" and press the Tuning control knob to confirm the setting.
6. With "Yes" selected, press the Tuning control knob. The display will show "Waiting for PC wizard".
7. Go to the website above to download the latest software. Follow the on-screen instructions on
your PC provided with the upgrade software to complete the software upgrade.
Note:
Please use AC power cord as main power when upgrading software. Do not switch off the power to
the radio until the update operation is complete and the radio has restarted, otherwise the unit may
become permanently damaged.
GB
25