Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Instructions; Données Techniques; Conditions Environnementales - Conrad V-3.5M Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Safety instructions

An exclamation mark placed in the centre of a triangle refers to
important advice contained in the operating manual. Please read
the complete operating manual before commissioning the pro-
duct, since it contains important information on the proper ope-
ration of the device.
A flash in the centre of a triangle indicates unprotected, live
components or elements inside of the housing. The touching of
these components or elements might lead to dangerous injuries.
The guarantees become invalid in the event of damage resulting
from non-observance of the operating manual ! We do not accept
responsibility for such damage!
We accept no responsibility for property damage or personal inju-
ries caused by improper use or non-observance of safety instruc-
tions! Furthermore, in all such cases guarantees become invalid.
The unauthorised rebuilding and/ or modifying of the product is not permitted,
because of safety and approval reasons (CE).
Only a proper shock-proof socket of the public supply network must be used as vol-
tage source (230 V / 50 Hz).
Make sure that the device is commissioned properly. Observe the operating manual.
Make sure that the mains cable is not squeezed or damaged by sharp edges during
the mounting or assembly of the product.
Devices which are operated with line voltage do not belong in a child's hands. There-
fore, be extremely careful when operating the device while children are present,
especially when they are trying to insert objects into the device housing; danger of a
hazardous electrical shock.
Never spill liquids on electrical equipment. High danger of fire or hazardous electrical
shocks. In any such case, separate the device from the power supply and contact an
expert.
Do not expose the device to high temperatures, wetness or strong vibrations, nor to
strong mechanical load.
24
Données techniques
Tension de service . . . . . . . . . . . .: 230 VCA / 50 Hz
Consommation . . . . . . . . . . . . . . .: 780 W
Disjoncteur de protection . . . . . . .: 250 V / 4 A temporisé
5 x 20 mm
Sensibilité à l'entrée . . . . . . . . . . .: 1,1 V (XLR) 250 mV (douille de jack)
Impédance d'entrée . . . . . . . . . . .: 21 kOhm (symétrique)
5,5 kOhm (asymétrique)
Puissance de sortie . . . . . . . . . . .: 2 x 150 W / 8 ohms
2 x 230 W / 4 ohms
1 x 350 W / 2 ohms
Plage de fréquences . . . . . . . . . .: 20-20.000 Hz
Taux de distorsion . . . . . . . . . . . .: <0,05%
Rapport signal/bruit . . . . . . . . . . .: 100 dB (A)
Facteur d'amortissement . . . . . . .: 300
Bandes de fréquences (égaliseur): 63 / 125 / 250 / 500 / 1k / 2k / 4k / 8k / 16 kHz
Plage de réglage . . . . . . . . . . . . .: +/-15 dB
Dimensions (LXPXH) . . . . . . . . . .: 483 (19 ») x 407 x 89mm (2 unités de hauteur).

Conditions environnementales:

Plage de température de service .: +10 - + 40°C
57

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis