Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Instructions - Conrad G-25 DSP Bedienungsanleitung

Gitarrenverstärker drive
Inhaltsverzeichnis

Werbung

If fuses need to be changed, make sure they are replaced exclusively with fuses of
the same type and rated current (refer to the Technical Data).
It is absolutely impermissible to repair fuses or bridge the fuse hol-
der.
After disconnecting the device from the voltage source (disconnect the power plug
and the power cable!), use a suitable screwdriver to prise out the fuse holder (10)
with the defective fuse.
Remove the defective fuse and replace it with a fuse of the same type.
Now cautiously press the fuse holder (10) with the new fuse back into its seat.
Only then may you reconnect the device to the mains power and take it into operati-
on again.
Disposal
Once the product becomes unusable, dispose of it in accordance with the relevant
statutory regulations.
Troubleshooting
By purchasing the Drive G-25/G-35 DSP guitar amplifier, unit you have acquired a
product that has been designed to the state of the art and is operationally safe.
However, problems and malfunctions may occur.
For this reason we want to describe how to troubleshoot potential malfunctions:
Always heed the safety instructions!
24

Safety Instructions

Damage due to non-compliance with these operating instructions
leads to expiry of the warranty. We do not accept liability for conse-
quential damage!
We do not accept liability for damage to property or injury to persons
caused by mishandling or non-compliance with the safety instruc-
tions. Under these circumstances, any warranty expires.
For safety and certification (CE) reasons, unauthorised modifications and/or changes
to the product are not permitted.
The only permissible voltage source is a proper mains socket (230 V / 50 Hz) of the
public supply network with an earthing contact.
Make sure that the device is taken into operation correctly. Take the device into ope-
ration in compliance with the operating instructions.
When setting up the product, make sure that the power cable is not pinched or
damaged by sharp edges.
Devices operated using mains voltage must be kept out of the reach of children. For
this reason, be particularly cautious when using the device in the presence of child-
ren. They may try to stick objects into the device through openings in the housing.
Hazard of suffering a fatal electrical shock!
Never pour out fluids above electrical devices. Imminent danger of a fire or of a fatal
electrical shock! If fluid does get into the device, immediately disconnect the power
plug from the mains socket and revert to an expert.
Do not expose the device to high temperatures, high degrees of humidity, strong
vibrations or high mechanical loads.
Contact an expert if you have any doubt about how the equipment works or about
how to connect it.
Do not leave packaging material lying around carelessly. In the hands of children,
plastic films and/or bags and polystyrene parts etc. can turn into dangerous toys.
Do not leave the device in operation unattended.
Comply with the safety and operating instructions of any other appliances that are
connected to the device.
17

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

G-35 dsp

Inhaltsverzeichnis