Display And Control Elements; A) Screen - Conrad 75 20 16 Bedienungsanleitung

6. Display and Control Elements

a) Screen

See front fold-out page for illustrations.
1) Display
2) Button "MENU"
Call up or leave the menu
3) "VOL-" button
Decreasing the volume
4) "VOL+" button
Increase the volume
5) "ON/OFF" button
The screen can be switched on or
into standby with this button if it is
properly connected to the power
supply.
6) "CH -" button
Channel selection button; also
serves as navigation button in the
menu.
7) "CH+-" button
Channel selection button; also
serves as navigation button in the
menu.
The screen's mounting base may be attached stationarily. It is
equipped with three mounting holes in the bottom. Make sure
that cables or wires are not damaged when drilling or bolting in
place.
26
8) "INPUT" button
Button for video source selection
9) "POWER" and "IR Receiver"
LED
Lights up when the screen is
switched on. Do not light during
standby.
10) Connections for the power
supply (12 V/DC)
11) VGA input
12) S VIDEO input
13) VIDEO input (Cinch)
14) AUDIO input (right)
15) AUDIO input (let)
16) PC Audio input
17) Earphone jack (3.5 mm jack
socket)
18) Antenna input (not present in
version of the screen).