Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation
a) Buttons on the Monitor
• Switching On/Off
Briefly press the "M/
" button to turn the monitor on. To turn the monitor off, press and hold
the "M/
" button for about 2 seconds.
• Selecting and Adjusting Menu Functions
Briefly press the "M/
" button to display the OSD menu.
The 5 main functions ("PICTURE," "AUDIO," "OPTION," "SYSTEM," and "PRESET") can be
selected with the "
" button.
When the desired main function is displayed, press the "M/
one of the sub-functions. This is marked in colour, and a hand symbol "
on the left.
The setting value of the sub-function can be changed with the "
Then press the "M/
" button again multiple times to go to the next sub-menu or return to the
main function.
If the selection of the main functions is active, press the "
Alternatively, press the "
" button multiple times until the OSD menu disappears (or wait
about 10 seconds without pressing any buttons).
• Adjusting volume
When the monitor is not displaying the OSD menu, the desired volume can be set with the
"
" and "
" buttons.
The volume can also be changed in the OSD menu in the "AUDIO" main function.
• Choosing AV input
Briefly press the "AV" button to choose between the two inputs. The currently active input is
briefly shown in the top right of the display ("AV1" or "AV2").
b) Buttons on the IR Remote Control
• Switching On/Off
Press the "
" button to switch the monitor on or off.
• Selecting and Adjusting Menu Functions
Briefly press the "MENU" button to display the OSD menu.
The 5 main functions ("PICTURE," "AUDIO," "OPTION," "SYSTEM," and
"PRESET") can be selected with the "
When the desired main function is displayed, press the "MENU," "CH
or "CH
" buttons multiple times to select one of the sub-functions.
This is marked in colour, and a hand symbol "
left.
The setting value of the sub-function can be changed with the "
"
" buttons.
Then press the "MENU," "CH
," or "CH
sub-menu or return to the main function.
If the selection of the main functions is active, press the "
Alternatively, press the "
" button multiple times until the OSD menu disappears (or wait
about 10 seconds without pressing any buttons).
• Adjusting or Muting the Volume
When the monitor is not in the OSD menu, the desired volume can be set with the "
"
" buttons.
The volume adjustment can also be done in the OSD menu in the main function "AUDIO."
To mute the audio playback, press the button "
• Choosing AV input
Briefly press the "SEL" button to choose between the two inputs. The currently active input is
briefly shown in the top right of the display ("AV1" or "AV2").
• Mirroring the Picture Horizontally and Vertically
Depending on the mounting and direction of the camera, the picture can be mirrored
horizontally and vertically. Press the buttons "
tically).
• Select Picture Preset
You can switch between the picture presets (combinations of brightness, contrast and colour
saturation) with the "MODE" button. The "USER" setting stands for the settings made in the
OSD.
• Reset
The picture setting (brightness, contrast and colour saturation) is reset to the default setting
with the button "RESET."
• Timer
With the "TIMER" button, you can set the time after which the monitor should automatically turn
off.
Press the "TIMER" button multiple times until the desired time (e.g. "60" for 60 minutes) is
shown (max. 240 minutes can be selected). With the setting "0" the timer is switched off.
After the monitor has turned itself off, the timer setting is automatically reset to "0."
• "GRID" and "16:9/4:3" Buttons
Both of these buttons are non-functional with this version of the monitor.
c) Headphone Jack
At the lower right of the monitor, there is a 3.5 mm jack socket to which, for example,
headphones can be connected. The internal speaker is thereby muted.
" button multiple times to select
" appears next to it
" and "
" buttons.
" button to leave the OSD menu.
" button.
,"
" appears next to it on the
" and
" button again multiple times to go to the next
" button to leave the OSD menu.
".
" (mirror horizontally) or "
Maintenance and Cleaning
The product does not require any maintenance and should never be disassembled for any reason.
Only use a clean, soft cloth for cleaning. To remove dust, a soft, clean brush can be used.
Do not press on the display too strongly, since this may cause scratch marks.
Furthermore, the display glass might break!
Never use aggressive, chemical cleaning agents.
Disposal
a) General
Electrical and electronic products do not belong in the household waste!
Please dispose of the device when it is no longer of use, according to the current
statutory requirements.
b) Batteries and rechargeable batteries
As the end user, you are required by law (Battery Ordinance) to return all used batter-
ies/rechargeable batteries; disposal of them in the household waste is prohibited!
Contaminated batteries/rechargeable batteries are labelled with these symbols to
indicate that disposal in domestic waste is forbidden.
The symbols for the relevant heavy metals are: Cd=cadmium, Hg=mercury, Pb=lead
(name on battery/rechargeable battery, e.g. under the trash icons on the left).
You can dispose of your used batteries/rechargeable batteries free of charge at your
community's collection point or any place where batteries/rechargeable batteries are
sold!
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical Data
a) Monitor
Operating voltage: ........................12 V/DC
Current consumption:....................Max. 650 mA
Low voltage socket: ......................Polarity of round socket (5.5/2.1 mm):
Resolution:....................................320 x 234 pixels
Picture diagonal: ..........................14.2 cm (5.6")
Image format:................................4:3
Background illumination: ..............CCFL
Ambient temperature: ..................-10 °C to +50 °C
Weight:..........................................Ca. 280 g (without bracket)
Dimensions (W x H x D): ..............Ca. 146 x 109,5 x 30,5 mm (without bracket)
b) Wall plug transformer
Operating voltage: ........................100 – 240 V/AC, 50-60 Hz
Output: ..........................................12 V/DC, 1.2 A
c) IR remote control
" and
Operating voltage: ........................3 V/DC
Battery type:..................................1x CR2032
" (mirror ver-
© Copyright 2011 by Conrad Electronic SE.
Inner contact = plus/+
Outer contact = Minus /-
These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or
the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in
technology and equipment reserved.
Werbung
Inhaltsverzeichnis
