Manual Or Automatic Channel Selection - Conrad 75 17 47 Bedienungsanleitung

Press the button "Zoom ON/OFF"

8.5 Manual or automatic channel selection

You can select the individual camera channels by shortly pressing the channel selection button
You can also set a time for automatic switching to the next camera signal. Proceed as follows to use this
function:
• Press the MENU button
• Press the "up"
• Use the "left"
to deactivate automatic switching.
• Press the MENU button
Use menu items "Camera1 ON/OFF", "Camera2 ON/OFF", "Camera3 ON/OFF" and
"Camera4 ON/OFF" to activate (=Option ON) or deactivate (=Option OFF) camera
channels. If a camera channel is deactivated, it will neither be displayed during
automatic switching nor when a channel is manually selected by pressing the
button .
44
again to exit zoom mode. "ZOOM" is no longer displayed.
. The settings menu opens up.
or "down" buttons to select menu item "Scan Time".
or "right" buttons to select the desired time interval (in seconds) or select "OFF"
to accept the settings.
.