Recording Settings - Conrad 75 17 47 Bedienungsanleitung

10.10 Recording settings

1) Click on the "Security Setup" icon
2) Click on "Record" in the settings sub-menu.
3) Click on the desired time segment. Click once for continuous recording (blue square). Click twice for
recording when motion has been detected (red circle). Click three times for no recording (empty).
Every time segment represents a period of two hours.
4) Click on the camera box (under the respective time segment) until the desired camera channel is
selected. The system will then switch to the selected camera at the respective time (only one camera
can be recorded at a time). This means that one camera channel, i.e. one camera, must be assigned
to every time segment.
5) Define whether to record a video clip or a picture. Set the desired resolution.
The selected resolution is also applied to the camera window.
6) Click on the SAVE button to save the settings.
You can specify where to save the recordings by clicking on the "Security Setup" icon
selecting "Storage" in the settings sub-menu (right).
54
to activate the settings windows on the right.
and then