Connecting The Receiver To A Pc; Running The Isec Guarding Software; Registering The Isec Guarding Software - Conrad 75 17 47 Bedienungsanleitung

10.2. To connect the receiver to the PC
Make sure that neither the A/V cable nor the wall power supply is connected to the
receiver.
Connect the receiver directly to your PC using the provided USB cable. Do not use
any additional device such as a hub.
Put the mini USB plug of the provided USB cable into the USB socket (10). Connect the other end of the
USB cable to a free USB port of your PC. Wait a couple of seconds until the receiver has been recog-
nised as a USB device.

10.3 Running the iSEC Guarding Software

Click on the iSEC Guarding icon on your desktop to run the software.

10.4 Registering the iSEC Guarding Software

The "Registration Name" and the "Registration Code" are printed on the provided CD. Please register
your iSEC Guarding software or leave the input fields empty to register later.
The software is a one-hour trial version if it is not registered.
49