Settings - Pairing - Conrad 75 17 47 Bedienungsanleitung

10.8 Settings - Pairing

1) Click on the "Settings" icon
2) Click on "Device" in the settings sub-menu. Make sure that "Digital Wireless Camera" is listed under
"Device" which means that the USB receiver has been recognised as a wireless camera (recom-
mended settings).
3) Click on the desired camera channel.
4) After clicking on the desired receiver channel, the "Pairing" button (9) on the camera or receiver must
be pressed within 60 seconds.
Note that the pairing function assigns the paired transmitter/camera to the respective camera
channel. The transmitter/camera previously assigned to that channel is deleted.
5) When pairing is successful, the camera feed is automatically displayed in the camera window.
6) Click on the signal strength/alarm indicator to check if the transmitter/camera is installed in a place
with good transmitting conditions.
7) The camera display window shows the camera feed.
8) Click on the SAVE button to save the settings.
52
to activate the settings windows on the right.