Functions; Display Indicators; Pairing - Conrad 75 17 47 Bedienungsanleitung

8. Functions

8.1 Display indicators

A) Signal strength indicator
Shows the signal strength (the more bars are displayed, the better is the reception (also see chap-
ter "8.3. Signal strength")).
B) Camera channel indicator
The number represents the currently displayed radio channel.
C) Zoom indicator
The receiver has a digital zoom function. If the zoom is used, "ZOOM" is displayed as illustrated
above in "figure C".
D) Status indicator
If "NO SIGNAL" is displayed, the receiver does not receive any signal from the transmitter or from a
suitable wireless camera. In this case, run the pairing function (see next chapter) or select the cor-
rect camera channel that the camera has been assigned to.

8.2 Pairing

We recommend running this function before installation to avoid mounting the
devices wrongly.
Note that the pairing function assigns the paired receiver/camera to the respective
camera channel. The camera previously assigned to that channel is deleted.
• Press the MENU button
• Use the navigation buttons
• Then select the desired channel (1, 2, 3, or 4). Up to 4 receivers or cameras can be paired.
• Select the desired channel and press button
have 60 seconds to press the respective "pairing button" (2) at the transmitter or a suitable wire-
less camera.
42
(11) on the receiver or remote control.
to select the menu item "Pair CAM".
to start establishing the connection. Now you