Selecting The Playback Source; F) Play/Pause; Track Selection - Renkforce 1377584 Bedienungsanleitung

e) Selecting the Playback Source
• Select the playback source with the button CD/USB/SD (6). The display shows the display CD, USB or SD.
The playback source can only be changed in pause mode.

f) Play/Pause

• Push the PLAY/PAUSE (8) button to start playback.
• The time on the display starts counting. The starting position for playback is automatically saved as a
CUE mark.
You can stop playback in two ways:
• Push the button PLAY/PAUSE (8). The device pauses and remains in the last position.
• During playback, push the CUE button (9). The device returns to the CUE mark and pauses.
g) Track Selection
Use the dial switch TRACK/FOLDER (7) to select the tracks and the folders of the playback source.
Folder selection
• Push the dial TRACK/FOLDER (7). FOLDER will be displayed. You are now in the folder selection function
(MP3 playback).
• Turn the dial TRACK/FOLDER (7) to the left or right until the desired folder appears in the display.
• Push the dial TRACK/FOLDER (7) to confirm the selection.
• Now select the desired track. On this, see item "Track selection".

Track Selection

• Turn the dial TRACK/FOLDER (7) to the left or right until the desired track appears in the display.
• Push the dial TRACK/FOLDER (7) to confirm the selection.
Whenever a track is selected, the device automatically sets the CUE mark at the beginning of that
track.
39