H) Cueing - Renkforce 1377584 Bedienungsanleitung

Selecting a track with the buttons/number buttons 0-9 (31) of the remote control
• The keypad of the remote control is used to select a track directly. Select the desired track, e.g. track 8,
by pushing the corresponding number button 8 on the remote control. For multiple-digit track numbers,
e.g., 123, the number buttons 1, 2 and 3 must be pushed in quick succession.
Whenever a track is selected, the device automatically sets the CUE mark at the beginning of that
track.
Selecting a track with the SKIP buttons (30) of the remote control
• Push the SKIP button (forward) or (backward) to jump to the next or last track.

h) Cueing

You can select the starting point for playback using the CUE-function. The starting point is set automatically
(AUTO CUE).
The advantage of this function is that e.g. mute time at the start of a track is not played back and
that there are therefore no breaks after starting the playback.
Auto CUE
• The device will set the cue mark automatically where the music starts after the track selection or at the
beginning of a new track during playback.
Back CUE
• During playback, push the CUE button (9).
• The player returns to where playback was started and pauses.
Checking the CUE mark
• Press the CUE button (9).
• The device returns to the CUE mark and pauses.
• Hold down the CUE button (9).
• The music is played from the CUE mark as long as you hold down the CUE (9) button.
• When the button is released, the CD player returns to the CUE mark and pauses.
Deleting a CUE mark
• The CUE mark is deleted once a new CUE mark is set.
40