Charging The Battery - Renkforce RF-MP3-2000 Bedienungsanleitung

1 button
2 Display
3 Volume control wheel
4 button
5 button
6 button
7 MENU button
8 BACK button

8. Charging the battery

The USB connection used to charge the device must have a power rating of
at least 500 mA. This is normally the case for most computer USB ports.
Fully charge the built-in battery before using the device for the first time. De-
pending on the battery's charge status, the charging time is up to 5 hours.
• Connect the USB cable to the USB interface (12).
• Plug the other end of the USB cable into a USB port on a computer or a suitable
USB power supply.
• The charging indicator (13) will turn red when the built-in battery is charging and
turn off once charging is complete.
9 VOLUME button
10 RESET button
11 MicroSD card slot
12 USB interface
13 Charging indicator
14 LINE connection
15 Headphone socket
33