Herunterladen Inhalt Inhalt Diese Seite drucken

Conrad FS20 ZPS Bedienungsanleitung Seite 39

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Depending on the mode selection you can now select the interval time and the possible
activation period.
• The interval time can be between 15 and 60 minutes long.
• The smallest input value for the additional activation period is one minute.
• The maximum period is always one minute of the previously entered interval period.
Once the mode is fully defined, the corresponding time periods are to be entered in which the
"FS20 ZPS" is to actively control. Outside this time period the circulating pump is switched off
unless there is a manual switching via the FS20 remote control.
• A complete week is always entered each time. Four time period are available for each day.
• Before entering the individual time periods, select the weekday or the week days.
• In the display the setting "MO-FR" is shown at first, this setting means that the following time
periods for the days Monday to Friday will be identical. The time periods for the following
days Saturday and Sunday are separately entered after the week days.
If you do however wish to enter each day separately you can use the rotary encoder to select
the "MO" (Monday) setting and other individual days.
Furthermore it is possible to set the same time periods for the complete week. The setting
"MO-SO" can be confirmed with the "OK/Menü" button. The following four time periods will
be entered in succession in the normal manner.
Example:
Time period 1: 6 to 8:30 am
Time period 2: 11:45 am to 2 pm
• If you do not require all of the time periods, the remaining periods are to be set as follows:
Time period X: 00:00–00:00
• After you enter the fourth time period you must define any remaining days in the same
manner.
• Once everything is entered, the device confirms this on the display and saves the profile.
39

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis