Paragraph 10 - Level Alarm; Paragraph 11 - Flow Display Unit; Paragraph 12 - Setting The Pause - Oase Clear Fountain System CFS 50434 Gebrauchsanleitung

Pos: 89 /Gartentechnik/KDS Anlage TEKNA/Absatz 10 @ 12\mod_1253695415437_121.doc @ 75472 @
15. Paragraph 10 – Level Alarm
Programming
PROG
-
-
Alarms
Level Stop
-
Pos: 90 /Gartentechnik/KDS Anlage TEKNA/Absatz 11 @ 12\mod_1253695494592_121.doc @ 75499 @
16. Paragraph 11 – Flow Display Unit
Programming
PROG
-
-
Unit
Standard
-
Pos: 91 /Gartentechnik/KDS Anlage TEKNA/Absatz 12 @ 12\mod_1253695534670_121.doc @ 75526 @
17. Paragraph 12 – Setting the Pause
Programming
PROG
Configurazione
+
Paus
N.Aperto
-
Pos: 92 /Alle Produkte/Dummy_module/===== Seitenwechsel ===== @ 0\mod_1125648978015_0.doc @ 1631 @
Alarm Level
Stop
-
Alarm Flow
Alarm
ESC
Alarms
Level Alarm
-
Unit
Standard <-
-
+
Unit
L/h
-
-
+
-
Operation
This makes it possible to set the pump when the level sensor alarm
is activated. In other words you can decide whether to stop dosage
(Stop) or simply activate the alarm signal without stopping dosage.
Changes can be made by pressing the
keys to set the alarm type. Confirm by pressing the
key. Press to return to the main menu
Operation
measurement on the display.
Changes can be made by pressing the
keys to set the unit of measurement, choosing between
L/h (litres/hour), Gph (Gallons/hour), ml/m (millilitres/minute) or
standard (% or frequency, depending on settings). Press
confirm and return to the main menu
Operation
The pump can be paused by remote input.
The factory setting is Normally Open.
Changes can be made by pressing the
keys to set the new value ( N. OPEN or N. CLOSED).
Press to confirm and return to the main menu.
- GB -
key, then using the
key, then using the
to
key, then using the
33