Paragraph 7 - Statistics; Paragraph 8 - Password; Paragraph 9 - Flow Alarm - Oase Clear Fountain System CFS 50434 Gebrauchsanleitung

- GB -
Pos: 85 /Gartentechnik/KDS Anlage TEKNA/Absatz 7 @ 12\mod_1253695208771_121.doc @ 75391 @
12.

Paragraph 7 - Statistics

Programming
PROG
-
-
Statistic
Hours 10
Statistic
Strokes 1000
-
Statistic
Q.ty(L) 100
-
Statistic
Power 10
-
Statistic
Reset
ESC
Statistic
Hours 10
-
Pos: 86 /Gartentechnik/KDS Anlage TEKNA/Absatz 8 @ 12\mod_1253695307706_121.doc @ 75418 @
13. Paragraph 8 – Password
Programming
PROG
-
-
Password
****
Password
0000
-
Pos: 87 /Gartentechnik/KDS Anlage TEKNA/Absatz 9 @ 12\mod_1253695364391_121.doc @ 75445 @
14. Paragraph 9 – Flow Alarm
Programming
PROG
-
-
Alarms
Alarm Flow
Flow Off
Off
Alarm Flow
On
-
Alarm Flow - On
Signals
Alarms
Flow
Pos: 88 /Alle Produkte/Dummy_module/===== Seitenwechsel ===== @ 0\mod_1125648978015_0.doc @ 1631 @
32
-
Statistic Reset
+
NO
-
+
-
+
-
-
+
6
ESC
Off
-
Operation
The main menu displays the pump operation times. By pressing the
key you can access other statistics:
- Strokes = number of strokes made by the pump
- Q.ty (L) = quantity dosed by the pump in litres; this figure is
calculated on the basis of the memorised cc/stroke value
- Power = number of pump starts
- Reset = use the to reset the counters (YES) or
otherwise (NO), then confirm by pressing the
Pressing the key will take you back to the main menu.
Operation
By entering the password, you can enter the programming menu
and see all the set values. The password will be requested
whenever you seek to modify them.
The flashing line indicates the number than can be modified. Use
the key to select the number (from 1 to 9), and the
select the number to be modified. Confirm by pressing the
key. By setting "0000" (default), the password is eliminated.
Operation
This makes it possible to activate (deactivate) the flow sensor.
When activated (On), press the
the number of signals that the pump waits for before an alarm is
triggered. The number flashes when you press the
you can then use the
pressing the key. Press
key.
key to
key to access the request for
key, and
keys to set the value. Confirm by
to return to the main menu