Pbx / Supplementary Services; Dialling Pause - switel POWERTEL TF 520 Bedienungsanleitung

7 PBX / Supplementary Services

R button on private branch exchanges
If the telephone is connected to a private branch exchange, functions such
as transferring calls and automatic call back can be used via the R button.
Refer to the operating manual provided with your private branch exchange
as to which Flash time must be set in order to use these functions. The
sales outlet where you purchased the exchange can provide information
as to whether the telephone will work properly with the exchange.
Setting the Flash time
. Menu Structure, Page 82

Dialling pause

When using private branch exchanges, it is necessary to dial an access
code to obtain the dialling tone for an outside line. When using some older
private branch exchanges, it takes a little time before the dialling tone be-
comes audible. In the case of such private branch exchanges, a dialling
pause can be inserted after the number for an outside line in order to con-
tinue dialling directly without having to wait for the dialling tone.
£
After dialling the number for the outside line, the telephone waits approx. 3
seconds before dialling the actual phone number.
The pause can also be entered with the phone number in the
phone book.
R−button and supplementary services
Your telephone supports supplementary services provided by your tele-
phone network provider, such as brokering, call waiting and conference
facilities. These supplementary services can be used by implementing the
R button. Please contact your telephone network provider regarding
which Flash time must be set to use the supplementary services. Also con-
tact your telephone network provider with regard to enabling supplemen-
tary services. Setting the Flash time; . Page 82.
Insert a dialling pause
P" appears in the display
PBX / Supplementary Services
1
Caller number display (CLIP )
If this function is available with your telephone line, the number of the
caller appears in the display when the phone rings. If the phone number
has been stored in the phone book, the name associated with it appears in
the display.
If the name for a phone book entry has been spoken, the name
recorded is played between the first two ringing tones. This
means it is not necessary to go to the phone to see who is calling.
If the caller has suppressed transmission of their phone number, the corre-
sponding message appears in the display. The phone number cannot be
displayed and, as a result, is not stored in the missed calls and redialling
list.
The caller number display function is an optional service offered
by telephone network providers. Contact your network provider
for further information.
1
CLIP: Calling Line Identification Presentation
77
81