Pabx / Supplementary Services; Dialling Pause - switel TC 29 clip Bedienungsanleitung

PABX / Supplementary Services

8 PABX / Supplementary Services
R button on private branch exchanges
If the telephone is connected to a private branch exchange, all the functions associated with
the R−button, such as transferring calls, automatic call back, etc., can be used. Refer to the
operating manual provided with your private branch exchange as to which Flash time must be
set in order to use these functions. The dealer where you purchased the exchange can pro-
vide information as to whether the telephone will work properly with the exchange. Setting the
Flash time . Page 64.

Dialling pause

When using private branch exchanges, it is necessary to dial a specific number to obtain the
dialling tone for an outside line. When using some older private branch exchanges, it takes a
little time before the dialling tone becomes audible. In the case of such private branch ex-
changes, a dialling pause can be inserted after the number for an outside line in order to con-
tinue dialling directly without having to wait for the dialling tone.
£
After dialling the number for the outside line, the telephone waits approx. 3 seconds before
dialling the actual phone number.
R−button and supplementary services
Your telephone supports supplementary services provided by your telephone network pro-
vider, such as brokering, call waiting and conference facility. These supplementary services
can be used by implementing the R−button. Please contact your telephone network provider
regarding which Flash time must be set to use the supplementary services. Please contact the
telephone network provider with regard to enabling the supplementary services. Setting the
Flash time . Page 64.
Caller number display (CLIP
If this function is available with your telephone line, the number of the caller appears in the dis-
play when the phone rings. If the caller has suppressed transmission of his phone number, the
corresponding message appears in the display. The phone number is not displayed and, as a
result, is not stored in the call log.
1
CLIP: Calling Line Identification Presentation
74
Example:
0− £044219416 ...
Input:
Display: 0− P−044219416 ...
1
)
The caller number display function is an optional service offered by telephone net-
work providers. Contact your network provider for further information.
Insert a dialling pause