Kärcher KMR 1250 D Bedienungsanleitung Seite 19

1 Ignition lock
2 Motor speed adjustment
3 Raise/lower side-brushes, right
4 Upper position: Raise roller brush
Central position: Lower roller brush (op-
erating mode "Fine setting")
Lower position: Lower roller brush (op-
erating mode "store in floating position")
5 Raise/lower side-brushes, left (Option)
6 Switch for two-hand operations
7 Operating hour counter
8 Lights
9 Raise/lower bulk waste flap
10 Parking brake/ operating brake
11 Tilt waste container
(Function only in connection with the
two-hand operations switch)
12 Raise waste container
(Function only in connection with the
two-hand operations switch)
13 Lower waste container
(Function only in connection with the
two-hand operations switch)
14 Shake off dust filter
Operator console
15 Sweep wet/ dry (switch on/off dust suc-
tion)
16 Accelerator pedal, forwards
17 Accelerator pedal, reverse
18 Horn
19 Steering wheel
20 Open/ close device hood
Open/ close device hood
 Tilt the seat towards the front.
 Open the device hood at the handle slot
(pull it upward).
Note
The device hood is held at the top by the
gas pressure spring.
19
English