Battery Tool Use And Care; Service; Safety Of Persons, Animals And Property; Vibration Load - AL-KO solo MULTITOOL MT 42 Betriebsanleitung

GB
tools are dangerous in the hands of untrained
users.
■
Maintain power tools. Check for misalign-
ment or binding of moving parts, break-
age of parts and any other condition that
may affect the power tool's operation. If
damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
■
Keep cutting tools sharp and clean. Prop-
erly maintained cutting tools with sharp cut-
ting edges are less likely to bind and are eas-
ier to control.
■
Use the power tool, accessories and tool
bits etc. in accordance with these instruc-
tions, taking into account the working
conditions and the work to be performed.
Use of the power tool for operations different
from those intended could result in a hazard-
ous situation.
3.1.5

Battery tool use and care

■
Recharge only with the charger specified
by the manufacturer. A charter that is suit-
able for one type of battery pack may create
a risk of fire when used with another battery
pack.
■
Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury and
fire.
■
When battery pack is not in use, keep it
away from other metal objects, lie paper-
clips, coins, keys, nails, screws or other
small metal objects, that can make a con-
nection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
■
Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected form the
battery may cause irritation or burns.
3.1.6

Service

■
Have your power tool serviced by a quali-
fied repair person using only identical re-
placement parts. This will ensure that the
safety of the power tool is maintained.
22
3.2

Safety of persons, animals and property

■
Note that the user is responsible for acci-
dents and damage that may befall other per-
sons or their property.
■
Use the appliance only for the purposes for
which it is intended. Any non-intended use
can lead to injury and property damage.
■
Switch on the appliance only when there are
no other persons or animals in the working
area.
■
Maintain a safe distance to persons or ani-
mals, or switch off the appliance if persons or
animals approach.
3.2.1

Vibration load

WARNING!
Danger due to vibration
The actual magnitude of the vibration
emissions during the use of the appli-
ance may deviate from that stated by the
manufacturer. Observe the following in-
fluencing factors before or during use:
■
Is the appliance being used as in-
tended?
■
Is the material being cut or pro-
cessed in the proper manner?
■
Is the appliance in a proper condi-
tion of use?
■
Is the cutting tool properly sharp-
ened or is the correct cutting tool in-
stalled?
■
Are the handle grips and any option-
al vibration grips mounted, and are
they firmly attached to the appli-
ance?
■
Only operate the tool at the motor speed re-
quired for the respective work. Avoid using
the maximum speed in order to reduce noise
and vibrations.
■
The noise and vibrations of the tool may in-
crease due to improper use and mainte-
nance. This leads to health damage. In this
case, immediately switch off the tool and
have it repaired by an authorised service
workshop.
■
The degree of stress due to vibration de-
pends on the work to be performed or on the
use of the tool. Estimate the stress and plan
appropriate work breaks. This considerably
reduces stress due to vibration over the en-
tire working time.
Safety instructions
MT 42