Herunterladen Inhalt Inhalt Diese Seite drucken

Start-Up; The Correct Storage Location; Cleaning Before Use; Inserting The Rotary Plate - hanseatic D70H20L-DB Gebrauchsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Start-up

The correct storage location

The microwave should not be positioned di-
rectly next to a refrigerator or freezer. The
heat emitted from the microwave would cause
unnecessarily higher energy consumption by
the refrigerator or freezer.
The microwave should be positioned at least
2 m away from radios, TVs etc., so that the
reception is not disrupted.
The microwave should be positioned on a
level, stable and heat-resistant surface.
When selecting a location for the microwave,
please choose a place away from heat, steam
or high air humidity. The microwave may not
be used outdoors.
Please ensure that no highly flammable ma-
terials are located within the vicinity of the
microwave.
The socket must be near to the device and
easily accessible, in order that the plug can
be quickly pulled out in the event of any mal-
function.
In order to ensure sufficient air circulation,
the following minimum lateral and vertical
distances must be complied with:
Upwards:
30 cm
Backwards: 0 cm (place directly against the
wall)
To the left:
20 cm
To the right: 20 cm

Cleaning before use

Cleaning the microwave before first use (see
„Care and maintenance" on page GB-19).
Start-up

Inserting the rotary plate

(2)
(3)
1. Place the rotary plate drive (3) in the re-
cess in the middle and the roller ring (4)
in the recess in the cooking compartment
floor.
2. Place the rotary plate (2) with the ribbed
side facing down onto the rotary plate
drive (3) and the roller ring (4) and turn it
until its centre clicks into place on the ro-
tary plate drive (3).
• Always place the cooking container on
the rotary plate (2). This ensures that the
microwaves are distributed evenly, and
that any liquid overflow from the food into
the device is avoided.
• Use the rotary plate every time you use
the microwave.

Electrical connections

• Please check whether the device's supply
voltage is compatible with the supply volt-
age used in your house (please see the
type plate).
• Please ensure you only connect the de-
vice to a professionally installed protective
contact socket with sufficient fuse pro-
tection (see „Technical specifications" on
page GB-24).
• The plug socket must be located away
from the reverse side of the microwave,
otherwise the plug will be in contact with
the back plate.
• Do not use any multiplugs, extension
cables, timer switches or remote control
systems.
Page GB-11
570W
400W
Auftauen/250W
700W
Grill
125W
Kombi 1
Kombi 2
Kombi 3
0
1
2
3
4
30
5
6
25
7
20
15
8
10
9
(4)

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

D70h20l-dbe17

Inhaltsverzeichnis