Connecting The Power Supply - Brother P-touch QL-650TD Inbetriebnahme

12
STEP1 Before using the printer
3

Connecting the power supply

1
Connect the AC power cord into the
printer.
2
Insert the power plug into the AC outlet.
•
Before inserting the plug, check the outlet is 220 - 240
V AC.
•
Locate the printer near the outlet so that the power
plug can be pulled out easily if required.
•
When inserting or pulling out the power cord, be sure
to hold the power plug and not the cable.
When using the printer on Windows
before installing the software on the PC.
Do not connect the printer to the PC until the you see the message that prompts for
the connection when installing the printer driver.
If you connect the printer to the PC before
installing the printer driver, the dialog box
shown right is displayed. At that time, click
[Cancel] and disconnect the USB cable.
Then, install the printer driver. For details,
see "3. Installing the software" on page 35.
®
, do not connect the printer to the PC
Power cord Slot
Power cord