Brother P-touch QL-650TD Inbetriebnahme Seite 9

Follow these guidelines to avoid fire, electric shock, or other damage.
Cutter
Do not touch the blade of the cutter unit.
Do not open the top cover when the
cutter is operating.
Installation/Storage
Place the printer on a flat, stable surface
such as a desk.
DK Roll (DK Label, DK Tape)
Be careful not to drop the DK Roll.
DK Rolls use thermal paper and thermal
film. Both the label and print will fade
with sunlight and heat. Do not use DK
Rolls for outdoor use that requires
durability.
Caution
Do not apply excessive pressure to the
cutter unit.
Do not place any heavy objects on top of
the printer.
Depending on the location, material, and
environmental conditions, the label may
unpeel or become irremovable, the
colour of the label may change or be
transferred to other objects.
Before applying the label, check the
environmental condition and the
material. Test the label by affixing a
small piece of it to an inconspicuous
area of the intended surface.
5
STEP
1
STEP
2
STEP
3
STEP
4