Brother P-touch QL-650TD Inbetriebnahme Seite 47

16
Select the drive where you want to
install the driver, and click [Install].
The screen in which the name and password of
the administrator is now displayed.
17
Input the "Name" and the "Password" of
the administrator and click [OK].
The screen to check the installation is displayed.
18
When continuing the installation, click
[Continue Installation].
The installation starts.
19
When the installation is completed and
the message "The software was
successfully installed" is displayed, click
[Restart].
®
Your Mac will restart.
The installation of the printer driver is now
complete.
20
After rebooting, connect the USB
cable and power cord to the
printer.
Remove the caution label before
connecting the USB cable.
21
Connect the USB cable to the USB port of the Mac
Press the ON/OFF button ( ) of the printer to turn on the power.
If you are using a USB hub and your Mac
printer, try connecting the printer directly to your Mac
USB port
USB cable
® .
®
has problems recognizing the
®
.
43
STEP
1
STEP
2
STEP
3
Power cord
slot
Power cord
STEP
4