Mains Connection - MC Crypt 59 11 31 Bedienungsanleitung

Operation
DIP switch 1
Value 1
Example:
DIP switches 1, 3 and 5 are set to ON, all other switches are set to OFF.
Start address = 1 + 4 + 16 = 21
The following table provides information about the effects of the settings on the individual DMX channels.
DMX channel Value
1 0-255
2 0-255
3 0-255
4 0-5
6-10
11-255
5 0-111
112-143
144-255

Mains connection

The mains outlet to which the light effect is connected must be easily accessible to quickly
separate the device from the mains voltage in case of an error.
Do not let the mains cable come into contact with other cables.
Be careful when handling the mains cables and mains connection. Mains voltage can lead to
a deadly electric shock.
Make sure that no cable lies around openly. Install cables professionally to prevent accidents.
• Connect the mains connector to the mains socket of the device.
• Put the plug of the mains connector into an earthed wall socket.
• As soon as the effect light is connected to the mains supply it starts operating using the mode of operation and
the DMX start address set by the DIP switches.
22
2 3 4
2 4 8
Effect
red on/off
green on/off
blue on/off
continuous light
light off
flash speed
turn clockwise, speed adjustable
no rotating movement
turn anti-clockwise, speed adjustable
5 6 7
16 32 64
8 9
128 256