Intended Use; Explanation Of Symbols - MC Crypt 59 11 31 Bedienungsanleitung

Intended Use

The LED DMX Effect Light is used to generate light effects in light show equipment, party rooms, etc. and is controlled
using the built-in controller or an external DMX controller.
This product is only approved for the connection to 230V~/50Hz alternating voltage.
The DMX connection may only be connected to suitable DMX controllers.
The use is only permitted in enclosed spaces, not in the open air. Contact with moisture, such as in bathrooms, must
be avoided.
Any use other than that described above could lead to damage to this product and involves the risk of short circuits,
fire, electric shock, etc.
No part of the product should be altered or modified, and the housing must not be opened.
Please note all safety instructions and installation notes in this manual!

Explanation of symbols

This symbol on the device indicates that the user should read these operating instructions prior
to using the product.
The symbol showing a lightening in a triangle is used when your health is at risk, e.g. through
an electric shock. The device contains no parts that should be serviced by the user. Therefore,
do not open the device.
The arrow symbol indicates special information and advice on operating the device.
An exclamation mark indicates important notes in these operating instructions that should
strictly be observed.
The F symbol indicates that the device is suitable for direct attachment on normal flammable
F
surfaces.
This symbol indicates the minimum distance to the illuminated surface.
...m
16