Safety Instructions - Renkforce MP-C7085 Bedienungsanleitung

Safety Instructions

The warranty will lapse for damage due to non-compliance with these
operating instructions. We do not assume any liability for resulting
damage!
Nor do we assume liability for damage to property or personal injury,
caused by improper use or failure to observe the safety instructions. Any
claim to warranty will lapse in such cases.
Dear customer, the following safety instructions and danger warnings are not only to
protect your well-being but also to protect the device. Please read carefully through the
following points:
• The unauthorized conversion and/or modification of the product is inadmissible
because of safety and approval reasons (CE). Do not open/disassemble it!
There are no parts on the inside that need to be adjusted or maintained by
you.
Damaging the built-in integrated LiPo storage batteries presents high danger
of explosion or fire!
Maintenance, setting jobs or repairs may only be carried out by a specialist/
specialised workshop.
• The design of the enclosed power pack complies with safety class 2. Only
connect the power pack unit to a normal mains socket (230 V~/ 50 Hz).
• The product may only be operated in dry indoor rooms. It may not get wet or
damp. Mortal danger through electric shock (power pack unit) or risk of fire/
explosion (short-circuit of the accumulator).
Also protect the product from direct solar radiation, strong heat (>40°C), cold
(<0°C), dust and dirt.
• When the product is brought from a cold into a warm room (e.g. during
transport), condensation water may form. This could damage the product.
Wait until the product has reached room temperature before using it. This
process may take several hours.
• The product is not a toy and should be kept out of reach of children! Children
cannot judge the dangers involved, when dealing with electrical devices.
44
Operating Instructions

English