Intended Use - VOLTCRAFT MS-229 LCD Bedienungsanleitung

1. Intended use

The product is intended for testing the common batteries within a voltage range of 1.2 V/DC to 12 V/DC. For an objective
measuring result, the batteries/rechargeable batteries are tested under load. The current under load has to be preset depending
on the type of battery/storage battery.
The battery voltage under load and the percentage of remaining battery voltage are indicated on the display. Two 1.5 V button
cells (LR44) are required for operation.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use the product for purposes other
than those described above, the product may be damaged. In addition, improper use can cause hazards such as short circuiting,
fire, electric shock etc. Read the instructions carefully and keep them. Make this product available to third parties only together
with its operating instructions.
This product complies with the statutory national and European requirements. All company names and product names are
trademarks of their respective owners. All rights reserved.
19