Herunterladen Inhalt Inhalt Diese Seite drucken

Power Adapter; Setup Location - VOLTCRAFT CC-2 Bedienungsanleitung

Rundzellen-ladegerät
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

b) Power adapter
• The power adapter is constructed according to protection class II. Only connect
the power adapter to a standard mains socket.
• The mains socket must be easily accessible.
• Use only the power adapter enclosed to power the charger.
• Do not unplug the power adapter by pulling on the cable. Grip the sides of the
plug, and then remove the plug from the socket.
• Do not touch the power adapter if there are any signs of damage, as this may
cause a fatal electric shock!
Switch off the mains voltage to the socket containing the power adapter (switch off
at the corresponding circuit breaker or remove the safety fuse, and then switch off
at the corresponding RCCB).
You can then unplug the power adapter from the mains socket. Dispose of the
faulty power adapter in an environmentally friendly manner and discontinue use.
Replace it with an identical model.
c) Setup location
• The product may only be used in dry, enclosed spaces. The product must be
protected from damp and wet as there is a risk of a fatal electric shock at the

power adapter!

• Select a stable, flat, clean, sufficiently large place for the charger.
Do not place the charger on flammable materials (e.g. a carpet or tablecloth).
Always use a non-flammable, heatproof surface. Keep the charger away from
flammable or combustible materials (e.g. curtains).
• Ensure that the connection cable of the power adapter is not pinched or dam-
aged by sharp edges. Route the connection cable between the power adapter and
charger in such a way that it is not a trip hazard.
• Do not place any containers filled with liquid, e.g. vases or plants, on or next to
the charger. If these liquids manage to get inside the charger, the charger will be
ruined, and besides this, it also carries the highest risk of fire or explosion.
In this case, immediately disconnect the charger from the power supply and re-
move any inserted batteries. Discontinue use and take the charger to a specialist
repair centre.
24

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis