Date, Time And Alarm Setting - VOLTCRAFT HygroCube 100 Bedienungsanleitung

11. DATE, TIME AND ALARM SETTING

The device switches automatically to the "Set" mode as soon as the batteries were inserted. Alternately,
press the SET button (11) for about 3 seconds to enter the "Set" mode.
The value to be set flashes and can be changed by pressing the buttons "+" (12) and "-" (13).
Press the SET button (11) once again to reach the next setting point.
Following values can be adjusted in the "Set" mode:
• Time
• Date / year
• Alarm value for mould indicator
• Alarm value for VOC
• Alarm value for temperature
• Alarm value for humidity
Keep the SET button (11) pressed for about 3 seconds to exit the "Set" mode.
26