Cleaning And Maintenance - VOLTCRAFT HygroCube 100 Bedienungsanleitung

Indoor air quality indicator (9)
When the mains adapter is connected, the display indicates the air quality data (VOC) in ppm CO equiva-
2
lents in the lower segment. VOCs are volatile organic compounds that primarily affect the quality of indoor
air through organic effluents (vapours) of human respiration, perspiration and digestion, as well as vapours
of building materials and furnishings. The VOC indicator in the HygroCube 100 is subdivided into following
levels and points out ventilation recommendations.
If the Hygrocube 100 is disconnected from the mains adapter, the set time is indicated right then.

13. CLEANING AND MAINTENANCE

Apart from an occasional cleaning, this measuring device is maintenance-free. Use a dry, clean, lint-free,
antistatic cloth to clean the device. Do not use any abrasive or chemical agents or detergents containing
solvents.
Periodically check the technical safety of the wall plug transformer. It can be assumed that correct operation
is no longer possible if:
- the device is visibly damaged,
- if the device was stored under unfavourable conditions for a long period of time
- it has been subjected to considerable stress in transit.
29