Setting The Time - VOLTCRAFT SEM4500 Bedienungsanleitung

d) Setting the time
• As already outlined in Chapter 8. c, press and hold the
3 seconds until
in "CURRENT" mode, see Chapter 8. a). The current time mode ("12Hr" or
"24Hr") is displayed in the upper display row.
To switch to the next setting (electricity tariff) (see Chapter 8. e), briefly
press the
• To switch between time modes (12h or 24h),
briefly press the
flashes on the display.
• Switch between 12h and 24h mode by briefly
pressing the
(7).
When using 12h mode, "PM" appears to the right of the time during the
second half of the day.
• Briefly press the
• Set the hours by pressing the
• Briefly press the
• Set the minutes by pressing the
• Briefly press the
If no indicator is flashing, you can jump to the next setting by briefly press-
ing the (7) button or exit the setup menu by briefly pressing the
button (2).
52
appears in the upper left area of the display (only
button (7).
button (3); "12" or "24"
button (6) or
(3) button; the hours flash on the display.
button (6) or
(3) button; the minutes flash on the display.
button (3); all indicators stop flashing.
button
button (6) or
button (3) for
button (7).
button (7).